ID
Use this command to display the fixed unit ID for the system.
Level 0
Level 1
Level 2
Level 3
Level 4
Remarks
Related
Restrictions None
Example:
SSU_2000->ID
Unit ID: SSU2000
12713020-002-2 Revision D – April 2004
Displays
SSU2000
Same as Level 0 operation
Same as Level 0 operation
Same as Level 0 operation
Same as Level 0 operation
This command is used by test systems to tell the type of instrument
connected. This is different from the NAME command in that the
NAME information is settable by the user. The unit ID is also
returned on any status type command.
NAME
Interactive Command Set
SSU-2000 User's Guide 341