Symmetricom SSU-2000 User Manual page 239

Table 9-3. SSU-2000 System Components (Continued)
Item Description
33. SDU-2000
Synchronization
Distribution Unit
Expansion Shelf,
comes with D-clock
cable
34. Buffer Module
35. Clock Module Filler
Panel (3.2 in. wide)
36. Standard Module Filler
Panel (1 in. wide)
37. Cable, EIA-232 Shielded,
DB9P to DB9S, 5 ft.
(1.5 m)
12713020-002-2 Revision D – April 2004
Part Number
SDU-2000 Expansion Shelf
25413023-000-0 1. Up to 4 expansion shelves can be
2. Requires minimum of 1 Buffer module
3. Output modules interchangeable
4. Last Expansion shelf requires SDU
25413022-000-0 1 or 2 required per SDU-2000 expansion
shelf (install in slots A15 and A16).
Blank Filler Panels
10913022-000-0 Filler panels are required in all unused clock
slots.
10913021-000-0 Filler panels are required in all unused
SSU-2000 and SDU-2000 I/O slots.The
1-inch panel fits all unused slots in an
Expansion shelf and all except A1 and A12
(two end slots) in the Main shelf.
EIA-232 Cable
551026-0038 Used for communication with the
SSU-2000.
Hardware Configuration Guide
SSU-2000 Configuration Chart
Notes
attached to one SSU-2000 main shelf.
(2 recommended) and up to 14 Output
modules (no Input modules).
between Expansion shelf and Main shelf.
termination plug (shipped with Main
shelf).
SSU-2000 User's Guide 239