Ip Vrrp Priority; Ip Vrrp Timers Advertise; Show Ip Vrrp Interface Stats - Planet Networking & Communication WGS3-24000 User Manual

12.5.7 ip vrrp priority

This command sets the priority value for the virtual router configured on a specified interface. The priority of the interface is a
priority integer from 1 to 254. The parameter <vrid> is the virtual router ID which has an integer value ranges from 1 to 255.
▫
Default 100
▫
Format ip vrrp <vrid> priority <1-254>
▫
Mode Interface Config
12.5.7.1 no ip vrrp priority
This command sets the default priority value for the virtual router configured on a specified interface.
▫
Format no ip vrrp <vrid> priority
▫
Mode Interface Config

12.5.8 ip vrrp timers advertise

This command sets the frequency, in seconds, that an interface on the specified virtual router sends a virtual router
advertisement.
▫
Default 1
▫
Format ip vrrp <vrid> timers advertise <1-255>
▫
Mode Interface Config
12.5.8.1 no ip vrrp timers advertise
This command sets the default virtual router advertisement value for an interface.
▫
Format no ip vrrp <vrid> timers advertise
▫
Mode Interface Config

12.5.9 show ip vrrp interface stats

This command displays the statistical information about each virtual router configured on the switch.
▫
Format show ip vrrp interface stats <slot/port> <vrid>
▫
Modes Privileged EXEC
User EXEC
Uptime
Protocol
State Transitioned to
Master
Advertisement Received
Advertisement Interval
The time that the virtual router has been up, in days, hours, minutes and seconds.
Represents the protocol configured on the interface.
Represents the total number of times virtual router state has changed to MASTER.
Represents the total number of VRRP advertisements received by this virtual router.
Represents the total number of VRRP advertisements received for which advertisement
446