Planet Networking & Communication WGS3-24000 User Manual page 149

Force Authorized: The authenticator PAE unconditionally sets the controlled port to authorize.
Auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server.
Operating Control Mode - This field indicates the control mode under which the port is actually operating.
。
Possible values are:
ForceUnauthorized
ForceAuthorized
Auto
Reauthentication Enabled - This field shows whether reauthentication of the supplicant for the specified port is
。
allowed. The possible values are 'true' and 'false'. If the value is 'true' reauthentication will occur. Otherwise,
reauthentication will not be allowed.
Port Status - This field shows the authorization status of the specified port. The possible values are 'Authorized'
。
and 'Unauthorized'.
4.4.1.4 Port Access Control Statistics
This page shows the statistics of access control on each port.
Port - Selects the port to be displayed. When the selection is changed, a screen refresh will occur causing all fields
。
to be updated for the newly selected port. All physical interfaces are valid.
EAPOL Frames Received - This displays the number of valid EAPOL frames of any type that have been received
。
by this authenticator.
EAPOL Frames Transmitted - This displays the number of EAPOL frames of any type that have been transmitted
。
by this authenticator.
EAPOL Start Frames Received - This displays the number of EAPOL start frames that have been received by
。
Figure 4-4-3 Port Access Control Port Summary
149