Traffic Class - Specify which internal traffic class to map the corresponding IP Precedence.
。
IP Precedence - Displays the IP Precedence to be mapped.
。
4.5.5.3 IP DSCP Mapping Configuration
This page is to configure the IP DSCP mapping on the port.
Slot.Port - Select the physical interface for which you want to display or configure data. Select 'All' to set the
。
parameters for all ports to the same values.
Traffic Class - Specify which internal traffic class to map the corresponding IP DSCP.
。
IP DSCP - Displays the IP Precedence to be mapped.
。
Figure 4-5-28 IP DSCP Mapping Configuation
193