Planet Networking & Communication WGS3-24000 User Manual page 71

Total Packets Transmitted (Octets) - The total number of octets of data (including those in bad packets)
。
transmitted on the network (excluding framing bits but including FCS octets). This object can be used as a
reasonable estimate of Ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets
objects should be sampled before and after a common interval.
Packets Transmitted 1523-2047 Octets - The total number of packets (including bad packets) received that were
。
between 1523 and 2047 octets in length inclusive (excluding framing bits but including FCS octets).
Packets Transmitted 2048-4095 Octets - The total number of packets (including bad packets) received that were
。
between 2048 and 4095 octets in length inclusive (excluding framing bits but including FCS octets).
Packets Transmitted 4096-9216 Octets - The total number of packets (including bad packets) received that were
。
between 4096 and 9216 octets in length inclusive (excluding framing bits but including FCS octets).
Maximum Frame Size - The maximum Ethernet frame size the interface supports or is configured, including
。
Ethernet header, CRC, and payload. (1518 to 1600). The default maximum frame size is 1518.
Total Packets Transmitted Successfully - The number of frames that have been transmitted by this port to its
。
segment.
Unicast Packets Transmitted - The total number of packets that higher-level protocols requested be transmitted
。
to a subnetwork-unicast address, including those that were discarded or not sent.
Multicast Packets Transmitted - The total number of packets that higher-level protocols requested be transmitted
。
to a Multicast address, including those that were discarded or not sent.
Broadcast Packets Transmitted - The total number of packets that higher-level protocols requested be
。
transmitted to the Broadcast address, including those that were discarded or not sent.
Total Transmit Errors - The sum of Single, Multiple, and Excessive Collisions.
。
Tx FCS Errors - The total number of packets transmitted that had a length (excluding framing bits, but including
。
FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with an
integral number of octets
Tx Oversized - The total number of frames that exceeded the max permitted frame size. This counter has a max
。
increment rate of 815 counts per sec at 10 Mb/s.
Underrun Errors - The total number of frames discarded because the transmit FIFO buffer became empty during
。
frame transmission.
Total Transmit Packets Discarded - The sum of single collision frames discarded, multiple collision frames
。
discarded, and excessive frames discarded.
Single Collision Frames - A count of the number of successfully transmitted frames on a particular interface for
。
which transmission is inhibited by exactly one collision.
Multiple Collision Frames - A count of the number of successfully transmitted frames on a particular interface for
。
which transmission is inhibited by more than one collision.
Excessive Collision Frames - A count of frames for which transmission on a particular interface fails due to
。
excessive collisions.
Port Membership Discards - The number of frames discarded on egress for this port due to egress filtering being
。
enabled.
STP BPDUs Received - Number of STP BPDUs received at the selected port.
。
STP BPDUs Transmitted - Number of STP BPDUs transmitted from the selected port.
。
71