Planet Networking & Communication WGS3-24000 User Manual page 214

4.6.3.4 RIP Route Redistribution Configuration
Configuration
This screen can be used to configure the RIP Route Redistribution parameters. The allowable values for each fields are
displayed next to the field. If any invalid values are entered, an alert message will be displayed with the list of all the valid
values.
Configurable Data
。 Configured Source - This select box is a dynamic selector and would be populated by only those Source Routes
that have already been configured for redistribute by RIP. However, the topmost option in the select box would be
"Create", and this allows the user to configure another, among the Available Source Routes. The valid values are
Create
Static
Connected
OSPF
BGP
Available Source - This select box is a dynamic selector and would be populated by only those Source Routes that
。
have not previously been configured for redistribution by RIP. This select box would appear only if the user selects
"Create" option as Configured Source. The valid values are
Figure 4-6-12 RIP Interface Authentication Configuation
Figure 4-6-13 RIP Route Redistribution Configuration
214