Planet Networking & Communication WGS3-24000 User Manual page 77

TFTP File Path - Enter the path on the TFTP server where the selected file is located. You may enter up to 32
。
characters. The factory default is blank.
TFTP File Name - Enter the name on the TFTP server of the file you want to download. You may enter up to 32
。
characters. The factory default is blank.
Start File Transfer - To initiate the download you need to check this box and then select the submit button.
。
4.2.9.6 Upload File From Switch
Use this menu to upload a configuration or log file from the switch.
Figure 4-2-45 Download File To Switch
77