Severity Filter - A log records messages equal to or above a configured severity threshold. Select the severity
。
option by selecting the corresponding line on the pulldown entry field. These severity levels have been enumerated
below:
-Emergency (0): system is unusable
-Alert (1): action must be taken immediately
-Critical (2): critical conditions
-Error (3): error conditions
-Warning (4): warning conditions
-Notice(5): normal but significant conditions
-Informational(6): informational messages
-Debug(7): debug-level messages
Command Buttons
Submit - Update the switch with the values you entered.
。
4.2.5.8 Persistent Log
This help message applies to the format of all logged messages which are displayed for the buffered log, persistent log or
console log.
Format of the messages
。
<15>Aug 24 05:34:05 STK0 MSTP[2110]: mspt_api.c(318) 237 %% Interface 12 transitioned to root state on
message age timer expiry
-The above example indicates a user-level message (1) with severity 7 (debug) on a system that is not stack and
generated by component MSTP running in thread id 2110 on Aug 24 05:34:05 by line 318 of file mstp_api.c. This
is the 237th message logged. Messages logged to a collector or relay via syslog have an identical format to the
above message.
Command Buttons
Refresh - Refresh the page with the latest log entries.
。
Figure 4-2-24 Persistent Logs
56