▫
Port Identifier
▫
Port Priority
▫
Port Forwarding State - Current spanning tree state of this port
▫
Port Role
▫
Port Path Cost - Configured value of the Internal Port Path Cost parameter
▫
Designated Root - The Identifier of the designated root for this port.
▫
Designated Port Cost - Path Cost offered to the LAN by the Designated Port
▫
Designated Bridge Bridge - Identifier of the bridge with the Designated Port.
▫
Designated Port Identifier - Port on the Designated Bridge that offers the lowest cost to the LAN
If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command displays the settings and parameters for a
specific switch port within the common and internal spanning tree. The <slot/port> is the desired switch port. In this case, the
following are displayed.
▫
Port Identifier - The port identifier for this port within the CST.
▫
Port Priority - The priority of the port within the CST.
▫
Port Forwarding State - The forwarding state of the port within the CST.
▫
Port Role - The role of the specified interface within the CST.
▫
Port Path Cost - The configured path cost for the specified interface.
▫
Designated Root - Identifier of the designated root for this port within the CST.
▫
Designated Port Cost - Path Cost offered to the LAN by the Designated Port.
▫
Designated Bridge - The bridge containing the designated port
▫
Designated Port Identifier - Port on the Designated Bridge that offers the lowest cost to the LAN
▫
Topology Change Acknowledgement - Value of flag in next Configuration Bridge Protocol Data Unit (BPDU)
transmission indicating if a topology change is in progress for this port.
▫
Hello Time - The hello time in use for this port.
▫
Edge Port - The configured value indicating if this port is an edge port.
▫
Edge Port Status - The derived value of the edge port status. True if operating as an edge port; false otherwise.
▫
Point To Point MAC Status - Derived value indicating if this port is part of a point to point link.
▫
CST Regional Root - The regional root identifier in use for this port.
▫
CST Port Cost - The configured path cost for this port.
11.1.5 show spanning-tree mst port summary
This command displays the settings of one or all ports within the specified multiple spanning tree instance. The parameter
<mstid> indicates a particular MST instance. The parameter {<slot/port> | all} indicates the desired switch port or all ports.
If 0 (defined as the default CIST ID) is passed as the <mstid>, then the status summary is displayed for one or all ports within
the common and internal spanning tree.
▫
Format
show spanning-tree mst port summary <mstid> {<slot/port> | all}
▫
Mode
Privileged EXEC and User EXEC
▫
Instance ID - The MST instance associated with this port.
MST
▫
Slot/Port - The interface being displayed
▫
Type - Currently not used.
419