Planet Networking & Communication WGS3-24000 User Manual page 257

Advertise Address - Enter the IP Address to be used to advertise the router.
。
。 Maximum Advertise Interval - Enter the maximum time (in seconds) allowed between router advertisements sent
from the interface.
。 Minimum Advertise Interval - Enter the minimum time (in seconds) allowed between router advertisements sent
from the interface.
Advertise Lifetime - Enter the value (in seconds) to be used as the lifetime field in router advertisements sent from
。
the interface. This is the maximum length of time that the advertised addresses are to be considered as valid router
addresses by hosts.
。 Preference Level - Specify the preference level of the router as a default router relative to other routers on the
same subnet. Higher numbered addresses are preferred. You must enter an integer.
Command Buttons
。 Submit - Send the updated configuration to the switch. Configuration changes take effect immediately. The
changes will not be retained across a power cycle unless a save is performed.
257