Planet Networking & Communication WGS3-24000 User Manual page 108

4.3.3.6 Port MAC Deny
This page allows setting up per Port Mac Deny Interface Configuration
Selection Criteria
。 unit/slot/port - Selects the interface to be configured.
Configurable Data
。 Enable MAC Deny Feature - Used to enable or disable the MAC Deny Fe ature for the selected interface.
。 Add a static MAC address and vlan id- Adds a MAC address and a corr esonding vid to the list of statically locked
MAC addresses for the selected int erface.
。 Maximum static MAC Addresses allowed- Sets the maximum number of dy namically locked MAC addresses on
the selected interface.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect.These changes will not be retained
。
across a pow er cycle unless a save configuration is performed.
4.3.3.7 Port MAC Deny Listing
Figure 4-3-13 Per Port MAC Deny Interface Configuration
Figure 4-3-14 Per Port Denied MAC Address Display
108