Table of Contents
Advertisement
Metric
via Next-Hop
Interface
12.2.24 show ip route summary
Use this command to display the routing table summary. Use the optional all parameter to show the number of all routes,
including best and non-best routes. To include only the number of best routes, do not use the optional parameter.
▫
Format
show ip route summary [all]
▫
Mode
Privileged EXEC
User EXEC
Connected Routes
Static Routes
RIP Routes
BGP Routes
OSPF Routes
Total Routes
12.2.25 show ip route preferences
This command displays detailed information about the route preferences. Route preferences are used in determining the best
route. Lower router preference values are preferred over higher router preference values. A route with a preference of 255
cannot be used to forward traffic.
▫
Format
show ip route preferences
▫
Modes
Privileged EXEC
User EXEC
Local
Static
OSPF Intra
OSPF Inter
OSPF Ext T1
preferred over routes with higher values.
The cost associated with this route.
The outgoing router IP address to use when forwarding traffic to the next router (if any) in
the path toward the destination
The outgoing router interface to use when forwarding traffic to the next destination
The total number of connected routes in the routing table.
Total number of static routes in the routing table.
Total number of routes installed by RIP protocol.
Total number of routes installed by BGP protocol.
Total number of routes installed by OSPF protocol.
Total number of routes in the routing table.
This field displays the local route preference value.
This field displays the static route preference value.
This field displays the OSPF Intra route preference value.
This field displays the OSPF Inter route preference value.
This field displays the OSPF External Type-1 route preference value.
439
Advertisement
Table of Contents
