Remove IP Address - This appears only if the user selects Specific Dynamic/Gateway Entry or Specific Static Entry
。
in the Remove from Table Drop Down List. Allows the user to enter the IP Address against the entry that is to be
removed from the ARP Table.
Non-Configurable Data
。
Cache Size - Maximum number of ARP cache entries allowed. This is the cumulative number we get after adding
the Maximum ARP entries for each interface
。
Total Entry Count - Total number of Entries in the ARP table.
。
Peak Total Entries - Highest value reached by Total Entry Count. This counter value is restarted whenever the ARP
table Cache Size value is changed.
。
Active Static Entries - Total number of Active Static Entries in the ARP table.
Configured Static Entries - Total number of Configured Static Entries in the ARP table.
。
。
Maximum Static Entries - Maximum number of Static Entries that can be defined.
。
IP Address - The IP address of a device on a subnet attached to one of the switch's routing interfaces.
。
MAC Address - The unicast MAC address for the device. The format is six two-digit hexadecimal numbers
separated by colons, for example 00:06:29:32:81:40.
Slot/Port - The routing interface associated with the ARP entry.
。
。
Type - The type of the ARP entry:
。
Age - Age since the entry was last refreshed in the ARP Table. The format is hh:mm:ss.
Local - An ARP entry associated with one of the switch's routing interface's MAC addresses
Gateway - A dynamic ARP entry whose IP address is that of a router
Static - An ARP entry configured by the user
Dynamic - An ARP entry which has been learned by the router
252