Planet Networking & Communication WGS3-24000 User Manual page 99

4.3.1.3 VLAN Port Configuration
Selection Criteria
Slot.Port - Select the physical interface for which you want to display or configure data. Select 'All' to set the
。
parameters for all ports to same values.
Configurable Data
Port VLAN ID - Specify the VLAN ID you want assigned to untagged or priority tagged frames received on this port.
。
The factory default is 1.
Acceptable Frame Types - Specify how you want the port to handle untagged and priority tagged frames. If you
。
select 'VLAN only', the port will discard any untagged or priority tagged frames it receives. If you select 'Admit All',
untagged and priority tagged frames received on the port will be accepted and assigned the value of the Port VLAN
ID for this port. Whichever you select, VLAN tagged frames will be forwarded in accordance with the IEEE 802.1Q
VLAN standard. The factory default is 'Admit All'.
Ingress Filtering - Specify how you want the port to handle tagged frames. If you enable Ingress Filtering on the
。
pulldown menu, a tagged frame will be discarded if this port is not a member of the VLAN identified by the VLAN ID
in the tag. If you select disable from the pulldown menu, all tagged frames will be accepted. The factory default is
disable.
Port Priority - Specify the default 802.1p priority assigned to untagged packets arriving at the port.
。
Figure 4-3-2 VLAN Status
99