Planet Networking & Communication WGS3-24000 User Manual page 472

Virtual Link Not Found
Area Mismatch
Invalid Destination
Address
Wrong Authentication
Type
Authentication Failure
No Neighbor at Source
Address
Invalid OSPF Packet Type The number of OSPF packets discarded because the packet type field in the OSPF
Table 9 lists the number of OSPF packets of each type sent and received on the interface.
Packet Type
Hello
Database Description
LS Request
LS Update
LS Acknowledgement
Table 9. Type of OSPF Packets Sent and Received on the Interface
(NOTE: This field only applies to OSPFv2.)
The number of received OSPF packets discarded where the ingress interface is in a
non-backbone area and the OSPF header identifies the packet as belonging to the
backbone, but OSPF does not have a virtual link to the packet's sender.
The number of OSPF packets discarded because the area ID in the OSPF header is not
the area ID configured on the ingress interface.
The number of OSPF packets discarded because the packet's destination IP address is
not the address of the ingress interface and is not the AllDrRouters or AllSpfRouters
multicast addresses
The number of packets discarded because the authentication type specified in the OSPF
header does not match the authentication type configured on the ingress interface.
(NOTE: This field only applies to OSPFv2.)
The number of OSPF packets dropped because the sender is not an existing neighbor or
the sender's IP address does not match the previously recorded IP address for that
neighbor.
(NOTE: This field only applies to OSPFv2.)
The number of OSPF packets dropped because the sender is not an existing neighbor or
the sender's IP address does not match the previously recorded IP address for that
neighbor.
NOTE: Does not apply to Hellos.
header is not a known type.
Sent
6960
3
1
141
40
Received
6960
3
1
42
135
472