Selection Criteria
。
unit/slot/port - Selects the interface to be configured.
Non-configurable data
MAC Address - Displays the MAC addresses learned on a specific port.
。
。
VLAN ID - Displays the VLAN ID corresponding to the MAC address.
Number of Dynamic MAC addresses learned - Displays the number of dynamically learned MAC addresses on a
。
specific port.
Configurable Data
Delete the MAC address and vlan id- Deletes a MAC address and the c orresonding vid from the list of denied MAC
。
addresses for the selected interface .
Command Buttons
。
Submit - Applies the new configuration and causes the changes to ta ke effect.These changes will not be retained
across a power cycle unless a save configuration is performed.
4.3.3.8 CPU Multicast Configuration
Selection Criteria
。
unit/slot/port - Selects the interface to be configured.
Configurable Data
Admin Mode - Specifies whether Admin mode is enabled on the switch. Value is enabled or disabled.
。
。
CPU Multicast Rate- Sets the CPU Multicast Rate.
Figure 4-3-15 CPU Multicast Rate Configuration
109