Planet Networking & Communication WGS3-24000 User Manual page 92

Server - Specifies all the existing Server Addresses along with an additional option "Create". When the user selects
。
"Create" another text box "Address" appears where the user may enter Address for Server to be configured.
Address - Specifies the address of the SNTP server. This is a text string of up to 64 characters containing the
。
encoded unicast IP address or hostname of a SNTP server. Unicast SNTP requests will be sent to this address. If
this address is a DNS hostname, then that hostname should be resolved into an IP address each time a SNTP
request is sent to it.
Address Type - Specifies the address type of the configured SNTP Server address. Allowed type is :
。
•
IPV4
Default value is Unknown
Port - Specifies the port on the server to which SNTP requests are to be sent. Allowed range is (1 to 65535). Default
。
value is 123.
Priority - Specifies the priority of this server entry in determining the sequence of servers to which SNTP requests
。
will be sent. The client continues sending requests to different servers until a successful response is received or all
servers are exhausted. This object indicates the order in which to query the servers. A server entry with a
precedence of 1 will be queried before a server with a priority of 2, and so forth. If more than one server has the
same priority then the requesting order will follow the lexicographical ordering of the entries in this table. Allowed
range is (1 to 3). Default value is 1.
Version - Specifies the NTP Version running on the server. Allowed range is (1 to 4). Default value is 4.
。
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect immediately.
。
Delete - Deletes the SNTP Server entry. Sends the updated configuration to the switch. Configuration changes take
。
effect immediately.
It is recommended that you research any time server selection to ensure that it can meet your
Notice:
specific time server requirements. Any NTP time server selection should be evaluated to determine if
the server in question meets your specific time server requirements.
For more detail about the Time Server and Time Server List, please refer to the following URL:
http://ntp.isc.org/bin/view/Servers/WebHome
http://ntp.isc.org/bin/view/Servers/NTPPoolServers
http://support.microsoft.com/kb/262680/en-us
92