Planet Networking & Communication WGS3-24000 User Manual page 266

Secondary Address - The ip address for which data is to be displayed. Create must be selected to add a
。
secondary address to the interface.
Configurable Data
IP Address - Enter the IP address for the interface. This address must be a member of one of the subnets currently
。
configured on the interface. This value is readonly once configured.
Non-Configurable Data
。 Slot/Port - The interface for which data is to be displayed or configured.
。 Virtual Router ID - The Virtual Router ID for which data is to be displayed or configured.
Primary IP Address - The Primary IP Address of the Virtual Router.
。
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain the new values across a
。
power cycle, you must perform a save.
。 Delete - Delete the selected secondary IP Address
Cancel - Return to the Virtual Router Configuration screen.
。
266