Planet Networking & Communication WGS3-24000 User Manual page 76

4.2.9.4 Reset Password to Default
Reset all of the system login passwords to their default values. If you want the switch to retain the new values across a power
cycle, you must perform a save.
4.2.9.5 Download File To Switch
Use this menu to download a file to the switch.
Configurable Data
File Type - Specify what type of file you want to download:
。
Code - specify code when you want to upgrade the operational flash.
Configuration - specify configuration when you want to update the switch's configuration. If the file has
errors the update will be stopped.
SSH-1 RSA Key File - SSH-1 Rivest-Shamir-Adleman (RSA) Key File
SSH-2 RSA Key PEM File - SSH-2 Rivest-Shamir-Adleman (RSA) Key File (PEM Encoded)
SSH-2 DSA Key PEM File - SSH-2 Digital Signature Algorithm (DSA) Key File (PEM Encoded)
SSL Trusted Root Certificate PEM File - SSL Trusted Root Certificate File (PEM Encoded)
SSL Server Certificate PEM File - SSL Server Certificate File (PEM Encoded)
SSL DH Weak Encryption Parameter PEM File - SSL Diffie-Hellman Weak Encryption Parameter File
(PEM Encoded)
SSL DH Strong Encryption Parameter PEM File - SSL Diffie-Hellman Strong Encryption Parameter File
(PEM Encoded)
The factory default is code.
Note that to download SSH key files SSH must be administratively disabled and there can be no active SSH sessions.
TFTP Server IP Address - Enter the IP address of the TFTP server. The factory default is 0.0.0.0.
。
Figure 4-2-44 Reset Password to Default
76