Show Ip Rip; Redistribute (Rip) - Planet Networking & Communication WGS3-24000 User Manual

case. Simple - a route will not be included in updates sent to the router from which it was learned. Poisoned reverse - a route will
be included in updates sent to the router from which it was learned, but the metric will be set to infinity.
▫
Default simple
▫
Format split-horizon {none | simple | poison}
▫
Mode Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
▫
Format no split-horizon
▫
Mode Router RIP Config

12.8.14 redistribute (RIP)

This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There are five possible
match options. When you submit the command redistribute ospf match <match-type> the match-type or types specified are
added to any match types presently being redistributed. Internal routes are redistributed by default.
▫
Default metric—not-configured
match—internal
▫
Format for OSPF as source protocol
redistribute ospf [metric <0-15>] [match [internal] [external 1] [external 2] [nssa-external 1]
[nssa-external-2]]
▫
Format for other source protocol
redistribute
▫
Mode Router RIP Config
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers.
▫
Format no redistribute {ospf | bgp | static | connected} [metric] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external-2]]
▫
Mode Router RIP Config

12.8.15 show ip rip

This command displays information relevant to the RIP router.
▫
Format show ip rip
▫
Modes Privileged EXEC
User EXEC
RIP Admin Mode
{bgp | static | connected} [metric <0-15>]
Enable or disable.
482