Table of Contents
Advertisement
Expiry Time
13.5.19 show ip pimsm rp
This command displays the PIM information for candidate Rendezvous Points (RPs) for all IP multicast groups or for the specific
<groupaddress> <groupmask> provided in the command. The information in the table is displayed for each IP multicast group.
▫
Format
show ip pimsm rp {<groupaddress> <groupmask> | candidate | all}
▫
Mode
Privileged EXEC and User EXEC
Group Address
Group Mask
Address
Hold Time
Expiry Time
Component
13.5.20 show ip pimsm rphash
This command displays the RP router that will be selected from the set of active RP routers. The RP router, for the group, is
selected by using the hash algorithm defined in RFC 2362.
▫
Format
show ip pimsm rphash <groupaddress>
▫
Mode
Privileged EXEC and User EXE
CRP IP Address
Group Mask
This field indicates the expiry time of the neighbor on this interface.
This field specifies the IP multicast group address.
This field specifies the multicast group address subnet mask.
This field displays the IP address of the Candidate-RP.
This field displays the hold time of a Candidate-RP.
This field displays the minimum time remaining before the Candidate-RP will be declared
down.
This field displays a number which uniquely identifies the component. Each protocol
instance connected to a separate domain should have a different index value.
This field displays the IP address of the RP.
This field displays the group mask for the group address.
517
Advertisement
Table of Contents
