Show Ip Ospf Interface Brief - Planet Networking & Communication WGS3-24000 User Manual

Authentication Type
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type
State
Designated Router
Backup Designated
Router
Number of Link Events
Metric Cost

12.7.49 show ip ospf interface brief

This command displays brief information for the IFO object or virtual interface tables.
▫
Format show ip ospf interface brief
▫
Modes Privileged EXEC
User EXEC
Interface
OSPF Admin Mode
OSPF Area ID
Router Priority
Hello Interval
Dead Interval
Retransmit Interval
Retransmit Delay Interval A number representing the OSPF Transit Delay for the specified interface.
LSA Ack Interval
The OSPF Authentication Type for the specified interface are: none, simple, and encrypt.
Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF
Interface Type will be 'broadcast'.
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router.
The router ID representing the designated router.
The router ID representing the backup designated router.
The number of link events.
The cost of the OSPF interface.
Valid slot and port number separated by forward slashes.
States whether OSPF is enabled or disabled on a router interface.
Represents the OSPF Area Id for the specified interface.
A number representing the OSPF Priority for the specified interface.
A number representing the OSPF Hello Interval for the specified interface.
A number representing the OSPF Dead Interval for the specified interface.
A number representing the OSPF Retransmit Interval for the specified interface.
A number representing the OSPF LSA Acknowledgement Interval for the specified
470