Table of Contents
Advertisement
Admin Mode
Protocol State
Table Max Size
Number Of Packets For
Which Source Not Found
Number Of Packets
Protocol
Highest Entry Count
13.1.9 show ip mcast boundary
This command displays all the configured administrative scoped multicast boundaries.
▫
Format
show ip mcast boundary {<unit/slot/port> | all}
▫
Modes
Privileged EXEC User EXEC
Unit/Slot/Port
Group Ip
Mask
13.1.10 show ip mcast interface
This command displays the multicast information for the specified interface.
▫
Format
show ip mcast interface <unit/slot/port>
▫
Modes
Privileged EXEC User EXEC
Unit/Slot/Port
TTL
This field displays the administrative status of multicast. This is a configured value.
This field indicates the current state of the multicast protocol. Possible values are
Operational or Non-Operational.
This field displays the maximum number of entries allowed in the multicast table.
This displays the number of packets for which the source is not found.
For Which Group Not Found This displays the number of packets for which the group is
not found.
This field displays the multicast protocol running on the router. Possible values are
PIMDM, PIMSM, or DVMRP. Entry Count This field displays the number of entries in the
multicast table.
This field displays the highest entry count in the multicast table.
Valid unit, slot and port number separated by forward slashes.
The group IP address
The group IP mask
Valid unit, slot and port number separated by forward slashes.
This field displays the time-to-live value for this interface.
488
Advertisement
Table of Contents
