Planet Networking & Communication WGS3-24000 User Manual page 303

PIMSM Admin Mode - The administrative status of PIM-SM in the router: either enable or disable.
o
Join/Prune Interval - The interval between the transmission of PIM-SM Join/Prune messages.
o
Data Threshold Rate - The minimum source data rate in K bits/second above which the last-hop router will switch to
o
a source-specific shortest path tree.
Register Threshold Rate - The minimum source data rate in K bits/second above which the Rendezvous Point
o
router will switch to a source-specific shortest path tree.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
o
4.7.6.3 PIM-SM Interface Configuration
Selection Criteria
Slot/Port - Select the slot and port for which data is to be displayed or configured. Slot 0 is the base unit.
o
Configurable Data
Mode - Select enable or disable from the pulldown menu to set the administrative status of PIM-SM in the router.
o
The default is disable.
Figure 4-6-80 PIM-SM Interface Configuration
303