Table of Contents
Advertisement
13.1.11 show ip mcast mroute
This command displays a summary or all the details of the multicast table.
▫
Format
show ip mcast mroute {detail | summary}
▫
Modes
Privileged EXEC User EXEC
If the "detail" parameter is specified, the following fields are displayed:
Source IP Addr
Group IP Addr
Expiry Time
Up Time
RPF Neighbor
Flags
If the "summary" parameter is specified, the following fields are displayed:
Source IP Addr
Group IP Addr
Protocol
Incoming Interface
Outgoing Interface
13.1.12 show ip mcast mroute group
This command displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the entries in the multicast mroute table containing the given <groupipaddr>.
▫
Format
show ip mcast mroute group <groupipaddr> {detail |summary}
▫
Modes
Privileged EXEC User EXEC
Source IP Addr
This field displays the IP address of the multicast data source.
This field displays the IP address of the destination of the multicast packet.
This field displays the time of expiry of this entry in seconds.
This field displays the time elapsed since the entry was created in seconds.
This field displays the IP address of the RPF neighbor.
This field displays the flags associated with this entry.
This field displays the IP address of the multicast data source.
This field displays the IP address of the destination of the multicast packet
This field displays the multicast routing protocol by which this entry was created.
This field displays the interface on which the packet for this source/group arrives
List This field displays the list of outgoing interfaces on which this packet is forwarded.
This field displays the IP address of the multicast data source.
489
Advertisement
Table of Contents
