Planet Networking & Communication WGS3-24000 User Manual page 53

44.2.5.3 Command Logger Configuration
This page includes the following fields:
Configurable Data
。 Admin Mode - Enable/Disable the operation of the CLI Command logging by selecting the corresponding pulldown
field and clicking Submit.
4.2.5.4 Console Log Configuration
This allows logging to any serial device attached to the host.
Configurable Data
。 Admin Status -A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log messages. Enable
or Disable logging by selecting the corresponding line on the pulldown entry field.
。 Severity Filter - A log records messages equal to or above a configured severity threshold. Select the severity
option by selecting the corresponding line on the pulldown entry field. These severity levels have been enumerated
below:
-Emergency
-Alert (1): action must be taken immediately
-Critical
-Error (3): error conditions
-Warning
-Notice(5): normal but significant conditions
-Informational(6): informational messages
-Debug(7): debug-level messages
Figure 4-2-19 Command Logger Configuration
(0): system is unusable
(2): critical conditions
(4): warning conditions
Figure 4-2-20 Console Log Configuration
53