Planet Networking & Communication WGS3-24000 User Manual page 294

4.7.4.5 Mtrace Configuration
Configurable Data
Admin Mode - Select enable or disable from the pulldown menu. If you select enable the router will process and
o
forward mtrace requests received from other routers, otherwise received mtrace requests will be discarded. This
field is non-configurable for read-only users.
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect immediately. These
o
changes will not be retained across a power cycle unless a save is performed.
Figure 4-6-72 Mtrace Configuation
294