Table of Contents
Advertisement
Split Horizon Mode
Auto Summary Mode
Host Routes Accept Mode Enable or disable. If enabled the router accepts host routes. The default is enable.
Global Route Changes
Global queries
Default Metric
Default Route Advertise
12.8.16 show ip rip interface brief
This command displays general information for each RIP interface. For this command to display successful results routing must
be enabled per interface (i.e. ip rip).
▫
Format
show ip rip interface brief
▫
Modes
Privileged EXEC
User EXEC
Interface
IP Address
Send Version
Receive Version
RIP Mode
Link State
12.8.17 show ip rip interface
This command displays information related to a particular RIP interface.
None, simple or poison reverse.
Enable or disable. If enabled, groups of adjacent routes are summarized into single
entries, in order to reduce the total number of entries The default is enable.
The number of route changes made to the IP Route Database by RIP. This does not
include the refresh of a route's age.
The number of responses sent to RIP queries from other systems.
Sets a default for the metric of redistributed routes.This field displays the default metric if
one has already been set or blank if not configured earlier. The valid values are (1 to 15)
The default route.
Valid slot and port number separated by forward slashes.
The IP source address used by the specified RIP interface.
The RIP version(s) used when sending updates on the specified interface.
The types are none, RIP-1, RIP-1c, RIP-2.
The RIP version(s) allowed when receiving updates from the specified interface.
The types are none, RIP-1, RIP-2, Both
RIP administrative mode of router RIP operation; enable activates, disable deactivates it.
The mode of the interface (up or down).
483
Advertisement
Table of Contents
