Planet Networking & Communication WGS3-24000 User Manual page 98

Selection Criteria
VLAN ID and Name - You can use this screen to reconfigure an existing VLAN, or to create a new one. Use this
。
pulldown menu to select one of the existing VLANs, or select 'Create' to add a new one.
Configurable Data
VLAN ID - Specify the VLAN Identifier for the new VLAN. (You can only enter data in this field when you are
。
creating a new VLAN.) The range of the VLAN ID is (1 to 4093).
VLAN Name - Use this optional field to specify a name for the VLAN. It can be up to 32 alphanumeric characters
。
long, including blanks. The default is blank. VLAN ID 1 always has a name of 'Default'.
VLAN Type - This field identifies the type of the VLAN you are configuring. You cannot change the type of the
。
default VLAN (VLAN ID = 1): it is always type 'Default'. When you create a VLAN, using this screen, its type will
always be 'Static'. A VLAN that is created by GVRP registration initially has a type of 'Dynamic'. You may use this
pull-down menu to change its type to 'Static'.
Participation - Use this field to specify whether a port will participate in this VLAN. The factory default is
。
'Autodetect'. The possible values are:
Include - This port is always a member of this VLAN. This is equivalent to registration fixed in the IEEE 802.1Q
。
standard.
Exclude - This port is never a member of this VLAN. This is equivalent to registration forbidden in the IEEE
。
802.1Q standard.
Autodetect - Specifies that port may be dynamically registered in this VLAN via GVRP. The port will not participate
。
in this VLAN unless it receives a GVRP request. This is equivalent to registration normal in the IEEE 802.1Q
standard.
Tagging - Select the tagging behavior for this port in this VLAN. The factory default is 'Untagged'. The possible
。
values are:
Tagged - all frames transmitted for this VLAN will be tagged.
。
Untagged - all frames transmitted for this VLAN will be untagged.
。
4.3.1.2 VLAN Status
This page displays the status of all currently configured VLANs.
VLAN ID - The VLAN Identifier (VID) of the VLAN. The range of the VLAN ID is (1 to 4093) .
。
VLAN Name - The name of the VLAN. VLAN ID 1 is always named `Default`.
。
VLAN Type - The VLAN type:
。
Default ( VLAN ID = 1) -- always present
Static -- a VLAN you have configured
Dynamic -- a VLAN created by GVRP registration that you have not converted to static, and that GVRP may
therefore remove
98