Class Of Service - Planet Networking & Communication WGS3-24000 User Manual

4.3.9 Class of Service

4.3.9.1 802.1p Priority Mapping
This page is to configure the IEEE 802.1p priority mapping on the port.
Slot.Port - Select the physical interface for which you want to display or configure data. Select 'All' to set the
。
parameters for all ports to the same values.
Traffic Class - Specify which internal traffic class to map the corresponding 802.1p priority.
。
802.1p Priority - Displays the 802.1p priority to be mapped.
。
Figure 4-3-40 802.1p Priority Mapping
142