Planet Networking & Communication WGS3-24000 User Manual page 82

4.2.11.2 Pool Configuration
DHCP Server Pool Configuration
Configurable Data
Pool Name* - For a user with readwrite permission, this field would show names of all the existing pools along with
。
an additional option "Create". When the user selects "Create" another text box "Pool Name" appears where the user
may enter name for the Pool to be created.For a user with readonly permission, this field would show names of the
existing pools only.
Pool Name - This field appears when the user with read-write permission has selected "Create" in the Drop Down
。
list against Pool Name*.Specifies the Name of the Pool to be created. Pool Name can be upto 31 characters in
length.
Type of Binding - Specifies the type of binding for the pool.
。
•
Unallocated
•
Dynamic
•
Manual
Network Number - Specifies the subnet number for a DHCP address of a dynamic pool.
。
Network Mask - Specifies the subnet number for a DHCP address of a dynamic pool. Either Network Mask or Prefix
。
Length can be configured to specify the subnet mask but not both.
Prefix Length - Specifies the subnet number for a DHCP address of a dynamic pool. Either Network Mask or Prefix
。
Length can be configured to specify the subnet mask but not both. Valid Range is (0 to 32)
Client Name - Specifies the Client Name for DHCP manual Pool.
。
Figure 4-2-51 DHCP Server Pool Configuration
82