Planet Networking & Communication WGS3-24000 User Manual page 85

Command Buttons
Submit - Creates/Modifies the Pool Configuration. Sends the updated configuration to the switch. Configuration
。
changes take effect immediately.
Delete - Deletes the Pool. This field is not visible to a user with readonly permission.
。
The network ip address/mask of the switch shall be within the same as ip pool.
Note:
4.2.11.3 Pool Options
DHCP Server Pool Options
Selection Criteria
Pool Name - Shows all the existing Pool Names.
。
Non-Configurable Data
Option Code - Specifies the Option Code configured for the selected Pool.
。
Option Type - Specifies the Option Type against the Option Code configured for the selected pool.
。
•
•
•
Option Value - Specifies the Value against the Option Code configured for the selected pool.
。
Configurable Data
Delete Option Code - Specifies the Option Code to be deleted for the selected Pool. This field is not visible to a
。
user with readonly permission.
Command Buttons
Delete - Deletes the Option Code for the selected Pool. This field is not visible to a user with readonly permission.
。
Figure 4-2-54 DHCP Server Pool Options
Ascii
Hex
IP Address
85