Ip Irdp Holdtime; Ip Irdp Maxadvertinterval; Ip Irdp Minadvertinterval - Planet Networking & Communication WGS3-24000 User Manual

▫
Format ip irdp address <ipaddr>
▫
Mode Interface Config
12.3.2.1 no ip irdp address
This command configures the default address used to advertise the router for the interface.
▫
Format no ip irdp address
▫
Mode Interface Config

12.3.3 ip irdp holdtime

This command configures the value, in seconds, of the holdtime field of the router advertisement sent from this interface. The
holdtime range is the value of <maxadvertinterval> to 9000 seconds.
▫
Default 3 * maxinterval
▫
Format ip irdp holdtime <maxadvertinterval-9000>
▫
Mode Interface Config
12.3.3.1 no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router advertisement sent from this interface.
▫
Format no ip irdp holdtime
▫
Mode Interface Config

12.3.4 ip irdp maxadvertinterval

This command configures the maximum time, in seconds, allowed between sending router advertisements from the interface.
The range for maxadvertinterval is 4 to 1800 seconds.
▫
Default 600
▫
Format ip irdp maxadvertinterval <4-1800>
▫
Mode Interface Config
12.3.4.1 no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
▫
Format no ip irdp maxadvertinterval
▫
Mode Interface Config

12.3.5 ip irdp minadvertinterval

This command configures the minimum time, in seconds, allowed between sending router advertisements from the interface.
The range for minadvertinterval is three to the value of maxadvertinterval.
▫
Default 0.75 * maxadvertinterval
▫
Format ip irdp minadvertinterval <3-maxadvertinterval>
441