Planet Networking & Communication WGS3-24000 User Manual page 227

To add a new Area ID, use the <Add> button. (The default 0.0.0.0 indicates the OSPF backbone.) To
Note
:
modify or delete an existing Area ID, highlight the table entry with the cursor and select Enter.
4.6.4.4 OSPF Stub Area Summary
Non-Configurable Data
。 Area ID - The Area ID of the Stub area
。 Type of Service - The type of service associated with the stub metric. The switch supports Normal only.
。 Metric Value - Set the metric value you want applied for the default route advertised into the area. Valid values
range from 1 to 16,777,215.
。 Metric Type - The type of metric for the stub area where valid types are:
•
•
•
。 Import Summary LSAs - Whether the import of Summary LSAs is enabled or disabled.
Figure 4-6-21 OSPF Stub Area Summary
OSPF Metric - Regular OSPF metric
Comparable Cost - External Type 1 metrics that are comparable to the OSPF metric
Non-comparable Cost - External Type 2 metrics that are assumed to be larger than the cost of the
OSPF metric
227