Checking Your Physical Drives - Promise Technology VTRAK E610f Quick Start Manual

VTrak Quick Start Guide

Checking Your Physical Drives

The configuration script only works when all of your physical drives are
unconfigured. If you are setting up your VTrak system for the first time, all of your
drives will be unconfigured.
To check your physical drives:
1. In Tree View, click the VTrak
and Physical Drives
2. Under the Information tab, check Operational Status and Configuration.
If Operational Status is OK and Configuration is Unconfigured, your
physical drives are ready to run the configuration script.
Figure 10.Physical drive information
If you have created any disk arrays, logical drives, or spare drives, you must
delete them before you run the script. Be sure you back-up your important data
first, then delete the disk arrays and logical drives. See the VTrak Product (User)
Manual on the Software CD for instructions.
icon, Enclosures
icon.
14
icon, Enclosure icon,