Task 3: Making Management And Data Connections - Promise Technology VTRAK E610f Quick Start Manual

Task 3: Making Management and Data Connections

VTrak models have two RAID controllers. Each controller has an Ethernet (RJ45)
Management Port connector that enables you to monitor the VTrak over your
network using the WebPAM PROe Software. VTrak supports HTTP, HTTPS, and
Telnet protocols.
The VTrak RAID controllers have two 4-Gb Fibre Channel (FC) connections for
the data ports. See Figure 3.
You can configure your VTrak for:
• Storage Area Network (SAN)
• Direct Attached Storage (DAS)
• JBOD Expansion using a SAS data connection
Figure 3. VTrak RAID controller connectors
Fibre Channel data port 1
Fibre Channel data port 2
SAS expansion
port (to JBOD)
Mgmt
FC 1 FC 2
4 4
2 2
1 1
Gb/s Gb/s
Task 3: Making Management and Data Connections
FC 1 FC 2
4 4
2 2
1 1
Gb/s Gb/s
UPS
115200
8 N 1
5
RJ11 Serial
Connector
Mgmt
UPS
115200
8 N 1
Management
port
Mgmt
FC 1 FC 2
4 4
2 2
1 1
Gb/s Gb/s 115200
8 N 1
VTrak
UPS