V Lvps Cooling Fan Removal - Lexmark C935 Service Manual

24V LVPS cooling fan removal

1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
removal" on page
3. Remove the rear left middle cover. See
4. Remove the 24V LVPS card bracket assembly. See
page 4-96.
5. Disconnect the connector from the 24V LVPS cooling fan (A).
6. Remove the two screws securing the 24V LVPS cooling fan (A) to the 24V LVPS card bracket assembly (B).
7. Remove the 24V LVPS cooling fan (A).
Replacement warning: When replacing the 24V LVPS cooling fan (A), ensure that the label is facing up.
Rear lower cooling fan assembly
1. Remove the rear upper cooling fan bracket assembly. See
removal" on page
2. Remove the developer / transfer roll HVPS card assembly. See
assembly removal" on page
3. Remove the lower printer engine card bracket assembly. See
removal" on page
4. Remove the 5V LVPS card bracket assembly. See
page 4-97.
5. Disconnect the connector from the rear lower cooling fan assembly (A).
6. Release the harnesses from the clamp.
7. Remove the two screws securing the rear lower cooling fan assembly (A) to the machine.
"Rear cover assembly removal" on page
4-111.
"Rear left middle cover removal" on page
Connector
A
4-111.
4-112.
4-92.
"Rear upper cooling fan bracket assembly
"24V LVPS card bracket assembly removal" on
"Rear upper cooling fan bracket assembly
"Developer / transfer roll HVPS card
"Lower printer engine card bracket assembly
"5V LVPS card bracket assembly removal" on
5057-XXX
4-5.
4-6.
4-99
Repair information
Previous
Next
Go Back