Installation; Mounting The Dmp 128; Dmp 128 Models; Hardware Configuration - Extron electronics DMP 128 User Manual

installation

This section describes the installation of the DMP 128, including:
•
•
•
•
•
•
•
Mounting the DMP 128
The 1U high, full rack width, 8.5-inch deep DMP 128 Digital Matrix Processor can be:
•
•
•
For detailed mounting options and UL rack mounting guidelines, (see
mounting the DmP 128
DMP 128 Models
There are six models of the DMP 128 available. Each model has a different feature set for
various applications.
DMP 128 Model Matrix
The following feature matrix provides a breakdown of the various DMP 128 model
variations. Where differences occur in operation, they are noted in the text.
DMP 128
DMP 128 C
DMP 128 AT
DMP 128 C AT
DMP 128 C P
DMP 128 C P AT 12x8 ProDSP Processor with AEC, Telephone modem, EXP Bus, and

hardware configuration

The DMP 128 does not have physical controls for configuration or operation.
The DMP 128 has several front and rear panel operational indicators and a rear panel
reset button for hardware resets outlined in the following pages.
mounting the DmP 128
DmP 128 models
Hardware Configuration
Rear Panel Features and Cabling
USB Configuration Port (Front Panel)
Front Panel Indicators
Reset Actuator and LED
Set on a table,
Mounted on a rack shelf,
Mounted under a desk or tabletop.
on page 165).
model Description
12x8 ProDSP Processor
12x8 ProDSP Processor with AEC
12x8 ProDSP Processor with Dante Interface
12x8 ProDSP Processor with AEC, EXP Bus, and Dante Interface
12x8 ProDSP Processor with EXP Bus, AEC, and Telephone modem
Dante Interface
DMP 128 • Installation and Operation 5