About Global Configurator (With Gc Professional And Gc Plus Modes); Pc System Requirements - Extron electronics IPCP Pro 250 User Manual

About Global Configurator (with GC Professional and GC Plus Modes)
Global Configurator is the software tool for network setup and configuration of an IPCP Pro
control processor. Global Configurator:
•
•
•
•
To obtain Global Configurator (GC Professional, GC Plus) software, you must have an Extron
Insider account and contact an Extron support representative. Extron provides training to
our customers on how to use the software. Access to Global Configurator Professional is
available to users who successfully complete Extron Control Professional Certification.

PC System Requirements

To find the minimum hardware and software requirements for the PC you use to configure
the IPCP Pro Series:
•
•
Loads device drivers for monitoring the status of and controlling devices within the AV
system.
Uploads GUI Designer layouts to touchpanels and third-party touch interfaces.
Creates the configuration containing all the settings for the control processor and the
products with which it interacts in the AV system.
Generates a graphical user interface called GlobalViewer (GV) that is uploaded to the
control processor (a GlobalViewer host device) along with the completed configuration
and can be accessed as a Web page.
Visit the Download page (www.extron.com/download/index.aspx) on the Extron
website and navigate to the Web page for the specific software package (such as
Global Configurator and GUI Designer). Minimum PC hardware and software system
requirements are listed in the description section. In some cases, minimum device
firmware version requirements are also listed there.
If system requirements are not listed on the software package Web page, contact an
Extron support representative.
IPCP Pro Series • Introduction 6