Paper Exit Transport Belt Removal - Ricoh A095 Service Manual

6.4 PAPER EXIT TRANSPORT BELT REMOVAL

[C]
[A]
1. Turn off the copier main switch.
2. Remove the lower rear cover [A], rear cover [B] and the right side cover
[C] (2 screws).
3. Remove the inverter solenoid bracket [D] (2 screws).
4. Slide the paper exit unit all the way to the left.
5. Remove the 2 screws for the transport unit [E] , and open the exit unit.
Then remove the other 2 screws [F].
6. Carefully lift the front end of the transport unit [G], then remove the 4
paper exit transport belts [H].
NOTE: Reinstall the inverter solenoid bracket after sliding the paper exit
unit all the way to the right.
FSM
[B]
[H]
9-15
[E]
[D]
[G]
[F]
A095/A096/A097