[A]
[D]
[F]
[B]
[E]
[C]
12. Remove the front bracket [A] (2 screws).
13. Remove the screw [B] securing the scanner flat cable.
14. Unhook the four harness clamps [C].
15. Disconnect the connector [D] outside the optic side frame.
16. Remove the connector [E] from the optic side frame.
17. Remove the scanner clamps [F] securing both sides of the first scanner
unit to the scanner wires (4 screws).
FSM
5-19
A095/A096/A097