Table of Contents
Advertisement
CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT6645/6655/6665
SUBJECT:
PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT6645/6655/6665 Parts Catalogs. This information
should be incorporated into all existing FT6645/6655/6665 Parts Catalog documentation.
• •
UPDATE NO. 1 -
1. The size of both the Belt Drive Shaft and Pulley have been changed to ensure the pulley is securely
press-fitted on the shaft.
2. To prevent the 24Z Gear from turning freely on the shaft, both the shaft and Gear have been
changed to D-shape as shown below.
Pulley
OLD PART NO. NEW PART NO.
AB013770
AB013984
A0961125
A0961126
UNITS AFFECTED:
Not available at time of publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
6645/6655/6665 - 044
GEAR-24Z - To ensure Transfer Belt Drive, the following modifications have been
applied:
Belt Drive Shaft
DESCRIPTION
Gear - 24Z
Belt Drive Shaft
Old
Gear - 24Z
QTY
INT
1
1
1
1
1
1
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
06/16/95
New
REFERENCE
PAGE
ITEM
81
35
81
36
er the S/N cut-in or
Continued...
Advertisement
Table of Contents
