Table of Contents
Advertisement
Rev. 7/94
7.4 FUSING LAMP REPLACEMENT
7.4.1 Fusing Lamp Replacement FT6665 (A097) Only
[D]
[F]
[B] [B]'
1. Remove the fusing unit. (Refer to Fusing Unit Removal.)
2. Remove the terminal bracket [A] (2 screws).
3. Disconnect the front connectors [B] and [B]' and the rear connector [C]
and [C]'.
4. Remove the front fusing lamp holder [D] and the rear fusing lamp holder
[E] (1 screw each).
5. Replace the fusing lamps [F].
NOTE: Locate the green connectors [C] of the fusing lamp to the rear
side.
Set the connectors from the fusing lamps (green) [G] and from
the thermofuse (white) [H] in the correct position on the terminal.
A095/A096/A097
[E]
[C]'
[C]
5-98
B
[G]
[G]
[H]
[H]
[A]
FSM
Advertisement
Table of Contents
