Jogger Motor Replacement - Ricoh A095 Service Manual

8.5 JOGGER MOTOR REPLACEMENT

[G]
1. Take out the duplex unit. (Refer to the duplex unit removal.)
2. Remove the duplex front cover (3 screws).
3. Slide the lever [A] to the rear then open the separation belt unit [B].
4. Remove the lower separation guide plate [C] (2 screws).
5. Remove the pressure arm [D] (1 snap-ring).
6. Remove the harness cover [E] (1 screw).
7. Remove the two connectors [F].
8. Remove the upper stay [G] (4 screws, 1 connector).
FSM
[B]
[E]
5-115
[C]
[D]
[A]
[F]
A095/A096/A097