Feed-Out Motor (Feed-Out Unit) Removal - Ricoh A095 Service Manual

6.4

FEED-OUT MOTOR (FEED-OUT UNIT) REMOVAL

[C]
[B]
[B]
1. Fully raise the DJF then remove the front cover. (Refer to Transport Belt
Replacement.)
2. Remove the right cover [A] (4 screws).
3. Remove the two screws [B] fixing the transport belt assembly, then fold
the transport belt stay [C] as shown.
4. Open the original guide [D].
5. Disconnect the four connectors [E].
6. Remove the five screws [F].
FSM
[D]
[A]
[F]
[E]
[E]
7-19
[E]
[F]
A095/A096/A097