Table of Contents
Advertisement
CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT6645/6655/6665
SUBJECT:
TONER SCATTER
SYMPTOM:
Toner scatter in and around the toner bottle holder.
CAUSE:
Toner drops out of the cut-out for the bottle drive gear.
SOLUTION:
Install the Bottle Holder Cover (shown below).
Bottle Holder Cover
OLD PART NO. NEW PART NO.
A0963247
A0963241
A0963242
* DENOTES NEW ITEM
NOTE: The Bottle Stopper has been modified to reduce manufacturing costs. The old stopper and the new
one are interchangeable.
UNITS AFFECTED:
Not available at time of publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
6645/6655/6665 - 051
DESCRIPTION
Bottle Holder Cover
Bottle Stopper
QTY
INT
0 → 1
1 → 1
0
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
2/7/96
REFERENCE
PAGE
ITEM
57
37*
57
2
er the S/N cut-in or
Advertisement
Table of Contents
