Side-To-Side Registration Adjustment - Ricoh A095 Service Manual

Rev. 12/93

9.2 SIDE-TO-SIDE REGISTRATION ADJUSTMENT

[A]
[C]
– Rough Adjustment –
1. Loosen the screws [A] for the tandem tray or built-in LCT, [B] for 550
sheets fixed tray or universal tray, or [C] for by-pass feed tray.
2. Move the tray position by moving parts [D], [E] and [F] of the trays.
– Fine Adjustment –
1. Enter SP mode (refer to the service program access procedure) and
access the side to side registration adjustment mode (
Adjustment – PAGE 4).
2. Adjust side-to-side registration for each feed station by changing the SP
mode data.
NOTE: Copies can be made in SP mode. Touch "Copy in SP" key to
select the paper feed station.
Adjustment standard: Less than ± 2 mm difference between
original and copy.
A095/A096/A097
[D]
[B]
[F]
5-122
[E]
SP
1
FSM