Table of Contents
Advertisement
BULLETIN NUMBER:
APPLICABLE MODEL: FT6655/6665/6665
SUBJECT: SC508
SYMPTOM:
Even though paper exists in the right tray, the machine mis-detects a paper end condition and starts to
transport the paper from the left tray to the right. The result is an SC508.
CAUSE:
When loading the right tray, the operator did not set the
paper flush against the right side plate [A]. The rear
fences [B] cannot hold the paper correctly when the tray
bottom plate [C] rises and the paper slides down to the
left. If this occurs, the pick-up roller [D] may not touch
the paper and the machine mis-detects a paper end
condition. The left tray then moves toward the right [E]
resulting in the SC508 condition.
SOLUTION:
Instruct the operator to properly position the paper flush against the right side plate [A].
6645/6655/6665-027
[B]
[D]
[C]
[B]
09/30/94
[A]
[B]
[E]
Advertisement
Table of Contents
