Ricoh A095 Service Manual page 452

[A]
6. Remove five plastic caps [A] on the copier's left cover.
7. Install the front connecting bracket [B] (2 screws– M4 x 12) and the rear
connecting bracket [C] (2 screws– M4 x 12) on the copier.
8. Stick the entrance guide mylar [D] on the copier exit area as shown.
NOTE: Align the edge [E] of the cover and the mylar.
FSM
[C]
[D] [E]
10-9
[B]
[D]
A095/A096/A097